The Seed Fair

Are You 21 or Older?

It's part of our commitment to social responsibility to ensure visitors to the site are of legal age to use cannabis products.


Create Your Own Homemade Bong: 5 Easy DIY Tutorials Using Common Household Items

Homemade bong made from a plastic bottle being filled with cannabis ready for smoking

If you’re looking for a more creative and affordable way to get your smoke on, why not try making your own homemade bong?

While there are plenty of pre-made bongs on the market, nothing quite compares to the satisfaction of smoking out of something you made yourself. And, it turns out creating your own homemade bong isn’t as difficult as it sounds!

With a few common household items lying around, you can easily construct your own makeshift smoking device. We’ll go over five ways you can make your own homemade bong with just a few items found in your home.

So sit back, relax, and let’s get started!

What is a homemade bong?

A homemade bong is a smoking device that is typically made out of household items. Making a bong at home is a relatively simple process, and it can be done with a variety of materials.

The most common type of homemade bong is made out of a plastic bottle. To make this type of bong, simply cut the bottom off of a plastic bottle and then make a small hole in the side of the bottle near the top.

This hole will serve as the carb, which is used to control the airflow while smoking your favorite marijuana strains.

Once the carb is created, cover the hole with your finger and then fill the bottle with water. Be sure to leave enough space at the top of the bottle so that the water does not overflow when you add your weed. After adding your weed, put the cap back on the bottle and you are ready to smoke!

man holding a joint while smoking a homemade bong

Top 5 DIY bongs

You have a lot to pick from when it comes to DIY bongs. The choice would ultimately come down to what all household items are available at your disposal.

But for many consumers, the main criterion is the kind of marijuana experience that they’re trying to have, as that largely depends on the device and how you’re using it. Take a look at our list of homemade bongs you can create in the comfort of your home:

1. Honey Bear bong

Cannabis is sweeter when you smoke it from a honey bear bong. You can make this DIY device if you have a plastic honey bear bottle, bowl or downstem, knife, and a lighter home. Just follow these procedures:

  1. Clean the honey bear by rinsing off the content from the plastic container.
  2. Make a small hole by heating the spot on the bear where you’d like to place the downstem. Make a small incision on the spot using a knife.
  3. Insert the downstem or bowl through the hole. You have to create a secure and airtight seal by letting the plastic cool around it.
  4. You can start smoking cannabis from the DIY bowl by filling it with enough water and enough weed. Ignite the cannabis and inhale smoke through the top of the container.

Honey bear bottle homemade bong on a white background

2. Plastic bottle gravity bong

This is the simplest and easiest marijuana bong that you can make at home, since plastic bottles are usually always available.

You can use a plastic water bottle, mountain dew bottle, or any other bottles that could stand the heat. Together with a knife or a scissor and aluminum foil, you can start creating this homemade gravity bong. Here are the steps to follow:

  1. We need to cut the bottom off of the plastic bottle. To do this, start by piercing it with a knife about 2 inches from the base. Use that hole as an entry point and guide the knife around it until the bottom is detached.
  2. Make a bowl by unscrewing the cap from the bottle and replacing it with aluminum or tin foil. Use the tip of the knife and poke tiny holes in the foil.
  3. Find a bucket,  larger than the plastic bottle, and fill it with water. Leave a couple of inches at the top to avoid spillage when you fill the bucket.
  4. You can start smoking cannabis from the gravity bong by submerging the bottle into the bucket, with the mouthpiece remaining above the water. Sprinkle the weed onto the aluminum foil mouthpiece and then light the cannabis. As you are lighting it, slowly pull the bottle upwards, while keeping the open bottom submerged. This will create an area of vacuum inside the bottle and produce a suction effect by which the plastic bottle will be filled with smoke. Once the bottom of the bottle nears the surface, you can remove the foil bowl from the top and inhale through the mouthpiece. You can also push the bottle back down into the water to force smoke into your lungs.

Three-stage images of a homemade gravity bong: water-filled container, lifting a plastic bottle to create a vacuum, and inhaling smoke from the bottle.

3. Tic Tac bong

Do you have a Tic Tac container at home? You can use that to make a DIY marijuana bong. This is more preferable if you want to carry it discreetly for smoking cannabis in public.

Other materials you need include a small bowl or downstem, knife, and a lighter. Follow the instructions below:

  1. Empty and clean the tic tac bottle.
  2. Make a hole by heating the spot on the container to place the downstem. The ideal spot is on the thinner side of the bottle.
  3. Insert the downstem through the hole before the plastic hardens.
  4. You can start smoking cannabis once enough water is poured into the container. Fill and heat the bowl, and inhale through the mouthpiece at the top.

4. Milk jug bong

Some homes have daily or weekly supplies of milk. If you’re one of these folks, you can create a DIY bong out of milk bottles.

It’s pretty easy as long as you have these materials: milk jug, old cannabis pipe or bowl, silly putty, bendy straw, and a knife. Here’s what you need to do:

  1. Prepare the pipe by attaching the bendy end straw to its mouthpiece. Make sure the seal is secure and airtight.
  2. Make a hole in the container using a knife.
  3. Assemble the device by inserting the end of the straw into the hole of the milk jug. If there are any other gaps, use silly putty to cover them.
  4. You can start smoking cannabis once the milk jug is filled with enough water. Light the cannabis and inhale through the mouthpiece or opening at the top.

5. Apple pipe bong

Sounds crazy, right? We promise this is for real! You can make a DIY marijuana bong out of an apple. It gives you a flavorful experience while smoking up.

You just need an apple, pen, or pencil, and some basic carving skills to get started. Just follow this simple procedure:

  1. Make a hole through the top of an apple using a pen or pencil. Make sure it reaches the core of the apple. This hole will act as the bowl.
  2. Poke a second hole through the side of the apple, perpendicular to the hole that you’ve already carved. This one will act as the mouthpiece. The two holes should meet in the middle of the apple.
  3. Create a third hole on the other side of the apple that connects to the previously cleared pathways. This hole will serve as the carb.
  4. Carve the bowl into the hole where you can place the flower.
  5. Clean the path to ensure that the holes are clear of debris and are all interconnected.
  6. Light the flower and inhale smoke through the mouthpiece.

A man with dreadlocks making and apple bong on a wooden desk

Homemade bongs vs commercial bongs

If you’re going to smoke cannabis using a bong, you can either create the device yourself or buy one at a local or online dispensary. But which option is more practical and ideal for you?

There are certain pros and cons like cost, convenience, safety, efficiency, and other factors that should be considered. Of course, you can shift from one instrument to another depending on the circumstances.

Let’s break down each factor for clarity:

  • Cost

You can save some bucks with homemade bongs since you’re just using recycled materials to create them. On the other hand, commercial bongs can be a bit expensive since they’re sold for a profit.

  • Convenience

You can customize the design and experience with DIY bongs, depending on the available materials and your creativity. The same is true with commercial bongs, given the vast variety of different products sold in many dispensaries today. The choice is yours.

  • Safety

Using homemade bongs might be cheaper and more practical, but the safety of this device is not guaranteed. You have to create it at your own risk. On the other hand, commercial bongs have been produced using specialized technologies and materials which ought to adhere to specific standards. The degree of risk is more manageable with the latter option.

  • Efficiency

Homemade bongs can produce marijuana smoke at a similar frequency and quality to commercial bongs. But that also depends on how the product is made and how you’re using it. If you don’t achieve your desired experience, you can shift to another option. It comes down to your personal preference.

Woman exhaling weeed smoke from a homemade bong

How to smoke marijuana from a bong

Smoking marijuana from a homemade or commercial bong can be a bit confusing for first-timers. It only gets easier once you know what you’re doing. There are certain things that you should remember as you operate the device. Your ultimate goal here is to achieve a desirable experience considering the aforementioned factors.

Dosing is critical since the cannabinoid content may be highly potent for certain individuals. Here are key things to note for proper use:

  1. Prepare the bong by filling it with water and packing it up with cannabis flowers.
  2. Light the bong and take a few hits from the mouthpiece. You have to be conscious of the effects so that you can control the dosage.
  3. Inhale the smoke slowly and hold the smoke in your lungs for a few seconds. Afterward, exhale the smoke and repeat the process until you achieve the desired effects.

Practical tips when using DIY or commercial bongs

100% satisfaction and safety are guaranteed if you’re using any bong properly. Aside from the technical aspect though (as previously discussed), there are certain practices that should be adopted to achieve the best experience.

Over the years, many users and researchers have gathered inputs from personal experience on how the device could be maximized to benefit consumers. Some key points are provided below:

  • Create or choose a quality bong to achieve the best experience
  • Use the right marijuana flower depending on your preference
  • Control the dosing according to your tolerance level
  • Read consumer reviews to guide your decisions
  • Ask the budtender for clarifications
  • Shop at a reputable cannabis dispensary for your weed supplies

woman firing up a homemade bong

Grab our amazing offers today!

Smoking marijuana has become part of modern culture in many advanced societies including the United States and Canada. Many people have been using homemade and commercial bongs for this purpose.

Regardless of your preference, the need for quality cannabis flowers should be another topmost priority.

This would make or break your experience. You can get cheap marijuana seeds, flowers, and other supplies from The Seed Fair, a trusted brand for top-selling cannabis products.

We have amazing offers to give you the best experience at a reasonable cost. Shop with us now!


Making your own homemade bongs can be a fun and creative way to enjoy your cannabis. While they may not be as sophisticated as store-bought options, homemade bongs can be just as effective and offer a unique smoking experience.

Remember to use safe, non-toxic materials and take necessary precautions when using your homemade bong.

With a little ingenuity and some basic supplies, you can create a personalized and functional smoking device that perfectly suits your needs.

So grab your favorite cannabis strain, fire up your homemade bong, and enjoy a one-of-a-kind smoking experience!


Still not sure you can make a homemade bong? Check out these FAQs.

Are homemade bongs safe to use?

While homemade bongs can be safe to use, it’s important to exercise caution and use high-quality materials. Avoid using toxic or flammable substances, and make sure your bong is sturdy and free from leaks. Always practice responsible smoking habits to minimize any potential health risks.

How do I make a homemade bong?

There are many ways to make a homemade bong, ranging from simple plastic bottle designs to more complex constructions using glass or ceramic materials. There are also numerous online tutorials and guides that offer step-by-step instructions for making your own bong.

What materials can I use to make a homemade bong?

The materials you can use to make a homemade bong depend on your preference and creativity. Common materials include plastic bottles, glass jars, metal pipes, bamboo, and even fruit and vegetables. Just make sure that the materials you use are safe and heat-resistant.

Can I customize my homemade bong?

Yes! One of the advantages of making a homemade bong is the ability to customize it to your liking. You can add or remove features such as percolators, ash catchers, or diffusers to adjust the smoking experience to your preference.

Leave a Reply